15
. ELECTRICAL EQUIPMENT
IGNITION COIL INSPECTION
Continuity Test
*
This test is to inspect the continuity of
ignition coil.
Remove the met-in box. ( 12-4)
Measure the resistance between the
ignition coil primary coil terminals.
Resistance (20℃): 0.153~0.187Ω
Measure the secondary coil resistance
between the spark plug cap and the primary
coil terminal as Figure A shown.
Resistance (20℃) (with plug cap):
10~14KΩ
Measure the secondary coil resistance
between the ignition coil terminal and the
primary coil terminal as Figure B shown.
Resistance (20℃) (without plug cap):
7~9KΩ
Figure B
Ignition Coil
SUPER8 50 2T
Figure A
15-8