11
. CARBURETOR
SERVICE INFORMATION
GENERAL INSTRUCTIONS
• When working with gasoline, keep away from sparks and flames..
• Note the locations of O-rings when disassembling and replace them with new ones during
assembly.
• All cables, fuel lines and wires must be routed and secured at correct locations.
• Bleed air from the oil lines whenever they are disconnected.
SPECIFICATIONS
Venturi dia.
Identification number
Float level
Main jet
Slow jet
Air screw opening
Idle speed
Throttle grip free play
SPECIAL TOOL
Float level gauge
TROUBLESHOOTING
Engine does not start
• No fuel in tank
• Too much fuel getting to cylinder
• Clogged fuel filter
• Clogged air cleaner
Engine idles roughly, stalls or runs poorly
• Incorrect idle speed
• Ignition malfunction
• Compression too low
• Incorrectly adjusted air screw
• Incorrect float level
Lean mixture
• Clogged fuel jets
• Clogged fuel cap vent
• Clogged fuel filter
• Bent, kinked or restricted fuel line
• Clogged air cleaner
• Intake air leaks
• Fuel contaminated
• Faulty reed valve
• Clogged fuel jets
SUPER8 50 2T
SUPER8 50 2T
16mm
PB
8.6mm
#72
#35
1¼ ± ½
1850±100rpm
2~6mm
• Faulty float valve
• Float level too low
• Clogged air cleaner
Rich mixture
• Faulty float valve
• Float level too high
• Clogged air jets
11-2