Rear Wheel/Rear Brake/Rear Shock Absorber - KYMCO SUPER8 50 2T Service Manual

14
. REAR WHEEL/REAR BRAKE/REAR
SHOCK ABSORBER
Remove the brake cam bolt to remove the
brake arm, wear indicator plate and felt
seal.
Remove the brake arm.
REAR BRAKE ASSEMBLY
Apply grease to the anchor pin and brake
shoe moving parts.
Apply grease to the brake cam and install it.
Apply engine oil to the felt seal and install it
to the brake cam.
Install the wear indicator plate.
＊
Align the wide tooth of the wear indicator
plate with the wide groove on the brake
cam.
Install the brake arm onto the brake cam.
＊
Align the punch mark on the brake arm
with the scribed line on the brake cam.
Install and tighten the brake arm bolt.
Install the brake arm return spring.
Install the brake shoes.
14-5
Brake Arm
Wear Indicator Plate
Brake Arm
SUPER8 50 2T
Brake Cam
Grease
Punch Mark