KYMCO SUPER8 50 2T Service Manual page 8

2
. GENERAL INFORMATION
The connector
completely.
If the double connector has a lock, lock
it at the correct position.
Check if there is any loose wire.
Before connecting a terminal, check for
damaged terminal
negative terminal.
Check the double connector cover for
proper coverage and installation.
Insert the terminal completely.
Check the terminal cover for proper
coverage.
Do not make the terminal cover opening
face up.
Secure wire harnesses to the frame with
their respective
designated locations.
Tighten the bands so that only the
insulated surfaces
harnesses.
2-5
shall be inserted
cover or loose
wire bands at
contact the wire
the
SUPER8 50 2T
Snapping!