Front Wheel Removal; Front Wheel Inspection; Axle Runout; Wheel Rim - KYMCO SUPER8 50 2T Service Manual

13
.
STEERING HANDLEBAR/FRONT WHEEL/FRONT BRAKE/FRONT SHOCK
ABSORBER/FRONT FORK
FRONT WHEEL
REMOVAL
Remove the motorcycle front wheel off the
ground.
Disconnect the speedometer cable.
Remove the front axle nut and pull out the
axle.
Remove the front wheel.
Remove the front brake panel.
INSPECTION

AXLE RUNOUT

Set the axle in V blocks and measure the
runout using a dial gauge.
The actual runout is 1/2 of the total indicator
reading.
Service Limit: 0.2mm replace if over

WHEEL RIM

Check the wheel rim run-out.
Service Limits:
Radial: 2.0mm replace if over
Axial: 2.0mm replace if over
SUPER8 50 2T
Speedometer Cable
Axle Nut
Axle Shaft
13-4