Hot Keys - Mitel DT690 User Manual

10
10.1
10.2
1424-EN/LZT103 088 Uen J1 2016-03-18
SHORTCUTS
From the Short cuts tab (
such as making calls and sending messages. When you select
shortcut types is displayed. These shortcut types are: Soft keys, Hot keys, Naviga-
tion keys, and Multifunction button.
SOFT KEYS
There are three soft keys, located beneath the display. In idle mode, these keys can
be used for functions defined by the user of the phone.
To assign a function to a soft key, do the following:
1. Press Menu, select
2. Select Soft keys and press Select.
3. Select Left, Middle, or Right, and press Select.
4. Select Name and press Select.
Enter a name for the soft key, and press OK to save the setting.
5. Select Function and press Select.
6. Select a function from the list, and press Select.
7. Press Back to confirm, or enter any required information, such as a phone
number, and press OK to confirm.
Note: Depending on which function you select, you may need to enter more informa-
tion or make more selections. If, for example, you select Phone call or Send
message, you will be prompted for the phone number of whom to call or send
a message to.
8. Select Value (if available for the selected function), press Select, enter a value
and press OK.
9. Select Control question, and press Select.
10. Select Off or On, and press Select and then Back.
Note: The control question value is Off by default. If you select On, a control question
Proceed? is displayed when you press and hold the soft key.
11. Press Save.
The message Changes saved is displayed.

HOT KEYS

A hot key can be programmed to give access to frequently used functions such as
dialling a specific phone number, a shortcut to the menu, or sending an SMS. Keys 0
and 2 - 9 can be assigned as hot keys.
To assign a hot key, do the following:
1. Press Menu, select
) you can create shortcuts to frequently used functions,
, and press Select.
, and press Select.
S
HORTCUTS
, a list of available
55