Group Do Not Disturb - Mitel DT690 User Manual

16.3.3
16.3.4
16.3.5
16.4
16.4.1
84
Reentering all Groups
To reenter the group, do the following:
1. Press #21#.
Note: U.K., press #2#.
2. Press .
Wait for the call timer to start in the display.
3. Press to finish the procedure.
Leaving a Group
Group member can logoff from a particular group, which it is part of by executing the
following procedure:
1. Press #29*.
2. Dial your Group number and press # and
Wait for the call timer to start in the display.
3. Press to finish the procedure.
Reentering a Group
Group member can logon to a particular group, which it is part of by executing the fol-
lowing procedure:
1. Press *29*.
2. Dial your Group number and press # and
Wait for the call timer to start in the display.
3. Press to finish the procedure.

GROUP DO NOT DISTURB

The group do not disturb feature allows a directory number having GroupDoNotDis-
turb programming category set) to mark a group of extensions as group do not disturb,
i.e. calls to extensions in the group are not indicated. The calls shall be forwarded to
an answering position defined for the group. An extension with group do not disturb
activated can still make outgoing calls in the normal way.
To order group do not disturb
An extension having GroupDoNotDisturb programming category set can activate
group do not disturb by dialing the following procedure
1. Lift the handset (dial tone)
2. Press *25*group number# (special dial tone).
3. Replace the handset.
.
.
1424-EN/LZT 103 088 Uen J1 2016-03-18