Procedure Call - Mitel DT690 User Manual

20
1424-EN/LZT103 088 Uen J1 2016-03-18

PROCEDURE CALL

When configuring the functions Call services, In Call menu, Contacts, or a short-
cut/service to the Phone call function; the data added in these functions is static.
When entering the data for the function to be used, it is possible to add a vari-
able/character U that allows the user to enter additional numerical characters before
calling the number/sending the data to a system.
See the following example for more information.
Example of configuration:
A user wants to create a service with the Phone call function. The PBX requires that a
prefix must be added to a phone number. In this case, the user can pre-program the
prefix and then enter the applicable phone number when using the Phone call func-
tion.
1. Press Menu, or the confirmation button.
2. Select Services,
3. Select Add new.
4. In the name field enter Call no.
5. Select the function Phone call
In the Number field, enter the prefix to be used followed by the character "U". In
this case, the text string is as follows *21*U. The character U represents an Enter
number dialog where the user can enter the phone number.
6. Press Save
When using the function, an Enter number dialog appears. If the user enters "123" (or
selects a contact with this number by pressing ) and presses "OK", the number
*21*123 will be dialed. Note that no call is established before the user presses "OK",
that is, post-dial.
P C
ROCEDURE ALL
99