Last External Number Redial; When You Receive A Busy Tone - Mitel DT690 User Manual

7.3
7.4
7.4.1
7.4.1.1
1424-EN/LZT103 088 Uen J1 2016-03-18
LAST EXTERNAL NUMBER RE-DIAL
When you make an external call, the system automatically stores the number dialed,
regardless of whether the call was successful or not.
To re-dial the last external number dialed:
• Press *** and then
Note: Finland and Sweden, press **0.

WHEN YOU RECEIVE A BUSY TONE

If you call an extension and receive a busy tone or get no answer, or if all external
lines are busy, you can use one of the following methods:
• Callback
• Call Waiting
• Intrusion
Note: These functions need to be programmed via the WinPDM or CPDM3. Please
contact the system administrator.
During an ongoing call, the soft key More is displayed, leading to the In call menu,
where you find options such as Callback and Call waiting.
Callback
When you order callback for a busy extension, you will be called back as soon as the
extension or line becomes free. If you order callback when there is no answer, you will
be called back when the extension has been used the next time.
Ordering Callback for an Extension
To initiate callback when a called extension is busy, or when there is no answer, do the
following:
1. Press More.
2. Select Callback, and press Select.
Note: If Callback is not programmed and does not appear when you press More, you
can press 6 to initiate callback. France, New Zealand and Sweden, press 5
3. Press and wait until the phone alerts.
You are called back (recall ring signal) when the ongoing call is finished or the
next time a new call is finished. You have to answer within eight seconds, other-
wise the callback service is canceled. While waiting for callback, you can make
and receive calls as usual.
4. Press to answer when you are called back.
The system calls the extension.
Note: Callbacks can be activated on several extensions at the same time.
.
O C
UTGOING ALLS
41