Time And Date; Setting Time Format; Setting Date Format - Mitel DT690 User Manual

19.2.3
19.3
19.3.1
19.3.2
94
4. Select Information or Black, and press Select.
5. Press Back to save the setting.
Note: For DT690; when charging the handset and the screen saver is shown, any
missed calls/incoming messages will be indicated by a high contrast "new
message" /" missed call "icon. For DT692; when charging the handset and
screen saver is shown, no missed calls/incoming messages will be indicated
in the display. Only the Alarm shield is displayed.
Contrast
To adjust the contrast, do the following:
1. Press Menu, select
2. Select Display, and press Select.
3. Select Contrast, and press Select.
4. Press the left or right navigation key to increase or decrease the contrast.
5. Press OK to save the setting.

TIME AND DATE

You can set time and date by following the instructions in the following two sections.

Setting Time Format

To set the time, do the following:
1. Press Menu, select
2. Select Time & Date, and press Select.
3. Select Time format, and press Select.
The actual time is displayed. The formats to select from are the following:
• 12:00 (AM/PM)
• 24:00
4. Press Back to save the settings.

Setting Date Format

To set the date, do the following:
1. Press Menu, select
2. Select Time & Date, and press Select.
3. Select Date format, and press Select.
The formats to select from are the following:
• DD/MM/YYYY (that is, 17/09/2009, also called Europe)
• MM/DD/YYYY (that is, 09/17/2009, also called US)
• YYYY-MM-DD (that is, 2009-09-17, ISO 8601)
, and press Select.
, and press Select.
, and press Select.
1424-EN/LZT 103 088 Uen J1 2016-03-18