Hot Keys; Multifunction Button; Volume Button - Mitel DT690 User Manual

User Manual
Cordless Telephone DT690 With Bluetooth
In stand-by mode the Soft keys can be used for specific functions defined by the user of
the handset.
3.4.7

Hot Keys

Any key "0", "2" - "9" can be set to a Hot Key. A long press on any of these numbers in
stand by mode are by default a short cut to the Call contact list. The list is in alphabetic
order, and depending on which key that is pressed is dependent on where in the list the
contact appears.
A Hot Key can be programmed to give access to frequently used functions such as dialling
a specific telephone number, a short cut on the menu, or sending an SMS.
3.4.8

Multifunction button

This button can be used as a short cut to functions; long or double press modes. It is by
default not used, but can be defined by the user of the handset.
3.4.9

Volume button

The two buttons placed on the upper left side of the cordless telephone are used for
increasing/decreasing the earpiece, headset, and the loudspeaker volume.
2008-06-12/ Ver. PA15
PRELIMINARY
TD 92474GB
17