Diversion On Busy; Internal Follow-Me - Mitel DT690 User Manual

13.2.3
13.3
13.3.1
13.3.2
1424-EN/LZT103 088 Uen J1 2016-03-18

Diversion on Busy

By using Diversion on busy, incoming calls are directly forwarded to a predefined des-
tination. This function is only available if system administrator has enabled it. Follow
the steps below to activate Diversion on busy from your own extension:
1. Press *212 #
2. Press and wait for the call timer to start in the display.
3. Press .
Follow the steps below to terminate Direct diversion for another extension:
1. Press #212 #
2. Press and wait for the call timer to start in the display.
3. Press .

INTERNAL FOLLOW-ME

Internal Follow-me means that all calls to your extension are diverted to an extension
of your choice (within the private network).
When Follow-me is enabled, the display shows the icon > after your number, and the
number of the answering position. A special dial tone will be heard. The phone can
still be used for outgoing calls. See also 13.1 Diversion from Call Services Menu on
page 65 and 21.3 In Charger on page 102.
Ordering Internal Follow-me
To order internal follow-me, do the following:
1. Press *21*.
Note: U.K., press *2*.
2. Dial the answering position number and press # and
Wait for the call timer to start in the display.
3. Press to finish the procedure.
Canceling Internal Follow-me
To cancel Internal follow-me, do the following:
1. Press #21#.
Note: U.K. press #2#.
2. Press .
Wait for the call timer to start in the display.
3. Press to finish the procedure.
C F
ALL ORWARDING
.
67