9.6
9.6.1
9.6.2
9.6.3
1424-EN/LZT103 088 Uen J1 2016-03-18
WRITING TEXT AND NUMBERS
This section explains how to write text and numbers, which is useful when you want to
add a new entry in the phonebook, or send a text message.
To enter a name or number, use the following keys:
•
Press
or
chosen row.
•
Press Clear to correct a wrong entry.
To add, for example, the name Smith in the phonebook, do the following:
1.
Press 7777 for S.
The marked character is selected after a time out or when another key is
pressed.
2.
Press 6 for m.
3.
Press 444 for i.
4.
Press 8 for t.
5.
Press 44 for h.
6.
Press OK when the name is complete.
Number Input Mode
A short press on a key enter the digits 0 - 9 and the
•
characters * and #.
•
To add a plus sign (+) in the number for international calls, press 0 twice.
Text Input Mode
•
A short press on a key 0-9 displays the first available character on that specific
key. The marked character is selected after a time out, or when another key is
pressed.
•
To change to upper or lower case, press
The same key can also be used to display only digits.
•
To add space in the text, press 0.
•
A long press on
Special Characters
Use the keypad to enter letters and characters. Press a key once for the first letter or
character, twice for the second, three times for the third, and so on. The most common
letters are printed above each key on the phone. All the available letters and charac-
ters are shown in figure 14 on page 54.
on the navigation key,
displays special characters.
, to move the cursor within the
before entering the character.
C
ONTACTS
53