Changing The Owner Id; Changing Answering Methods; Normal Answering - Mitel DT690 User Manual

19.5
19.6
19.6.1
19.6.2
1424-EN/LZT103 088 Uen J1 2016-03-18
2. Select Locks and press Select.
3. Select Phone lock and press Select.
4. Select Change PIN code and press Select.
5. Enter the old PIN code (default is 0000) and press OK.
6. Enter the new PIN code.
7. Enter the new PIN code again to confirm and press Save.

CHANGING THE OWNER ID

The Owner ID is set to identify the phone. To change the owner ID, do the following:
1. Press Menu, select
2. Select Owner ID, and press Select.
3. Enter a name and press Save to save the setting.

CHANGING ANSWERING METHODS

The phone can be set to answer a call automatically when a headset is used, or to
answer a call by a press on any key.
You can also change the answering behavior to:
• use Loudspeaking directly when
• automatically connect incoming call in Loudspeaking mode, without pressing
any key.

Normal Answering

The answering behavior is set to Hook-off by default. You can set it to any key by
doing the following:
1. Press Menu, select
2. Select Answering, and press Select.
3. Select Answering key, and press Select.
4. Select Any key and press Select.
5. Press Back to save the setting.
Automatic Answer (Headset Mode)
Note: The automatic answer mode is only relevant when a headset or a Bluetooth
headset is connected.
To set the phone to answer automatically, do the following:
1. Press Menu, select
2. Select Answering, and press Select.
3. Select Answer behaviour, and press Select.
, and press Select.
is pressed.
, and press Select.
, and press Select.
S
ETTINGS
97