Open Messaging During A Call - Mitel DT690 User Manual

12.5
12.6
12.6.1
60
1. Press More.
2. Select Contacts, and press Select.
3. Select Call contact to search a contact in the local or company phonebook. Or
select Central Phonebook to search a contact in the central phonebook.
4. Press Select.
5. Select or search a contact.
Note: If you wish to call the selected contact, you press Call or
is put on hold. For more information, see 12.6 Inquiry on page 60.

OPEN MESSAGING DURING A CALL

The Messaging menu can be accessed during an ongoing call by pressing the soft
key "More".
To search a contact during a call, do the following:
1. Press the soft key More during the call.
2. Select Messaging.
INQUIRY
Inquiry means placing an ongoing call on hold, and then calling a new party.
Note: This feature needs to be configured in the WinPDM or CPDM3. Please contact
the system administrator.
To make an inquiry to a third party during an ongoing call, do the following:
1. Press More during the call.
2. Select New call and press Select.
Note: If New call does not appear when you press More, it is possible to press R and
dial the third party to initiate the inquiry.
3. Dial the third party's phone number and press
OR
Press the
Note: It is only possible to select a contact from the local and company phonebook,
but not from the central phonebook, when making an inquiry.
4. When the third party answers, it is possible to switch between the calls (refer
back), transfer the call, create a conference, and end one of the calls.
Ending Inquiry Call
When yo want to end the inquiry call, do the following:
1. Press More during the call.
2. Select End call and press Select.
The third party is disconnected, and you are connected to the first party.
soft key, select a contact, press Select, and then press Call.
1424-EN/LZT 103 088 Uen J1 2016-03-18
. Then the first call
.