Other Useful Features; Account Code; Ongoing External Call; Call Statistics - Mitel DT690 User Manual

18
18.1
18.1.1
18.2
88

OTHER USEFUL FEATURES

This chapter describes more useful features available for the cordless phone and the
exchange.

ACCOUNT CODE

The account code function is used to charge a call to an account number or to prevent
unauthorized calls from your phone. The account code can have 1 to 15 digits.
To enable this function, do the following:
1. Press *61*.
Note: Finland and Norway, press *71*.
2. Dial the account code and press # and
Wait for a dial tone.
3. Dial the digit or digits to get an external line and the external number.

Ongoing External Call

When the account code function is used to charge a call, it is also possible to connect
an ongoing external call to an account code.
During the call, do the following:
1. Press R to put the ongoing call on hold.
Wait for a dial tone.
Note: The soft key R is default. If this soft key is reprogrammed to something else, this
function will not be available.
2. Press *61*.
Note: Finland and Norway, press *71*.
3. Enter the account code and press #.
Wait for a dial tone.
4. Press R.
5. Press to resume the call that was put on hold.

CALL STATISTICS

Your phone can tell you the duration of your last call and display the total time of all
calls.
To see the time spent on your last call and on all outgoing calls, do the following:
1. Press Menu, select
2. Select Call time and press Select.
The display shows duration information in hours and minutes for the Total time
as well as for the Last call.
.
, and press Select.
1424-EN/LZT 103 088 Uen J1 2016-03-18