System Connection Messages; Display Icons - Mitel DT690 User Manual

3.2.2
3.2.3
1424-EN/LZT103 088 Uen J1 2016-03-18

System Connection Messages

Possible system connection messages that can be displayed on your phone is
described below.
Shown in display
System A
No System
No access
No Subscription

Display Icons

The display icons are described below.
Icon
Indicating Description
System The phone has contact with System A. It is also
Indication possible to assign the system a name of your
choice.
Out of The phone is out of coverage. Go into range, or
coverage contact the system administrator.
When reentering the coverage area it can take a couple
of minutes before the phone has registered
automatically into the system.
Access The phone has contact with a system, calling is
Indication not allowed.
System The phone is not in contact with any system.
Indication Ask the system administrator to log on the
phone.
Description
Signal strength
Shown in the upper left corner, when the phone is connected to
a system. The staples shown in display depends on the signal
strength.
Full battery
Shown in upper right corner.
Low battery
Shown when 10% or less remains of the battery capacity.
Empty battery
Flashing when the remaining battery capacity is 5% or lower.
Loudspeaking
Displayed in the soft key bar during a call. Pressing this icon will
activate loudspeaking mode.
Loudspeaking off
Displayed when loudspeaking mode is enabled. Pressing the
soft key when this icon is displayed will deactivate loudspeaking
mode.
DT690 DT692 D
AND ESCRIPTION
19