Incoming Calls; Answering Calls - Mitel DT690 User Manual

6
6.1
36

INCOMING CALLS

An incoming call is indicated by a flashing indicator, accompanied by a ring signal and
a vibrating phone. The ring type tells you if the call is an internal, external or callback
call. Both ring signal and vibrator can be disabled. The calling party's number or
name, or both, is displayed.
The name of the caller will be shown if the calling party's phone number is stored in
any of the phonebooks. When a headset is connected to the phone, the answering
button on the headset can be used to answer the call.
The 25 last received phone numbers are stored in the call list along with the latest
dialed and missed phone numbers, see 8 Call List on page 48.

ANSWERING CALLS

When you receive a call, do the following to answer:
• Press .
OR
• Press to answer in loudspeaking mode (handsfree).
You are connected to the caller via the loudspeaker.
OR
• Press the answering button on the headset.
Note: Calls can be answered at any time even during programming, or while keying
in a number. When the phone is in idle mode, you can change the answering
method, see 19.6 Changing Answering Methods on page 97.
Other answering methods, such as Automatically or Loudspeaking, can be set from
the Settings tab, , see 19 Settings on page 92. When automatic answering is
enabled, an incoming call will be answered automatically after approximately one sec-
ond.
1424-EN/LZT 103 088 Uen J1 2016-03-18