Keys - Mitel 650 DECT Manual

Keys

Using the softkey
The 3 softkeys have variable functions. These functions are displayed above the key.
You can also store phone numbers and functions on a softkey (see chapter "Configuring
keys", page 89)
<Function>
<long>
Using the hotkey
The hotkey is a user configurable key for 1 to 6 phone numbers or functions.
To find out how to configure the hotkey, refer to the chapter "Configuring keys", page 89.
Mitel 650 DECT Phone
eud-1722/1.0 – R3.0 – 08.2015
Press the softkey where the function you want is displayed on top of
the screen.
Keep the softkey held down for a moment (about 2 seconds).
Using the call number:
Press the hotkey to open the hotkey menu.
Select the call number you want, press the
the contact using the call key.
➔
The connection is set up.
Using the function:
Press the hotkey to open the hotkey menu.
Select the function you want and activate with the
➔
The function is activated/deactivated.
Using the display and operating elements
Execute
softkey and call
softkey.
Execute
27