Hot Keys - Mitel DT4X3 User Manual

Mitel DT4x3 Cordless Phones for MiVoice MX-ONE
9
10
11
12
13
14
15
16
17
18
1. This is a system dependent feature.

3.1.1 HOT KEYS

Any key "0", "2" - "9" can be set to a Hot Key. A long press on any of these numbers in
idle mode are by default a short cut to the Call contact list. The list is in alphabetic
order, and depending on which key that is pressed is dependent on where in the list the
contact appears.
A Hot Key can be programmed to give access to frequently used functions such as
dialling a specific number, a short cut on the menu, or sending an SMS. See
Define Hot Keys
1424-EN/LZT103 089 D1 2016-03-04
Multi-purpose connector
The connector is used for battery charging, software download,
configuration and connection of an IP 65 classified headset
connector.
Microphone
The microphone is placed on the front bottom side of the handset.
Key lock and Upper/Lower case key
This key is to lock the keypad in combination with the soft key
"Lock ". This key is also for switching between upper/lower case
g
and digits.
1
Voice mail access
A quick access to the handset's Voice mail. See also
on page 74.
Mail
Off-hook key
To answer a call, to pre-dial a number, and as a short cut to the
Call list.
Soft keys
The three Soft keys are located just beneath the display and the
function of each Soft key is indicated by text in the display just
above the keys. In idle mode, the middle and right Soft key can be
used for specific functions defined by the user of the handset. See
8.7.1 Define Soft Keys
Mute and PTT button
A long press on the Mute button in idle mode, changes between
ring signal on/off. At incomming call, a long press on the Mute
button silencing the ring signal.
During a call, a long press on the PTT button changes between
microphone on/off.
Volume button (down)
To decrease the speaker earpiece, headset, and the loudspeaker
volume. The button is placed on the upper left side of the handset.
Volume button (up)
To increase the speaker earpiece, headset, and the loudspeaker
volume. The button is placed on the upper left side of the handset.
LED
Indicates incoming call, messaging, low battery, and charging.
on page 61.
on page 60.
10.1 Voice
8.7.2
14