Phone Locks; Activating Automatic Key Lock; Activating Manual Key Lock - Mitel DT690 User Manual

19.4
19.4.1
19.4.2
1424-EN/LZT103 088 Uen J1 2016-03-18
• MMM DD YYYY (that is, Sept 17 2009)
• DD MMM YY (that is, 17 Sept 09)
• DD.MM.YYYY (that is, 17.09.2009)
• DD-MM-YYYY (that is, 17-09-2009)
4. Press Back to save the setting.

PHONE LOCKS

There are two different phone locks:
• Key lock, which prevents keys to be pressed by mistake.
• Phone lock, which protects the phone from unauthorized use.
When the phone lock function is activated, you are prompted for a PIN code
when you turn on the phone.

Activating Automatic Key Lock

The keypad can be set to lock 20 seconds after it was last used. When in idle mode a
locked keypad is indicated by
To activate the automatic key lock, do the following:
1. Press Menu, select
2. Select Locks and press Select.
3. Select Automatic key lock and press Select.
4. Select On, and press Select.
5. Press Back to save the setting.
To deactivate Select "Off"
Note: It is possible to answer or reject incoming calls while the keypad is locked. If
configured in the WinPDM or CPDM3, it is also possible to make an emer-
gency call while the keypad is locked.

Activating Manual Key Lock

You are recommended always to have the automatic lock on, but it is possible to man-
ually lock and unlock the keypad as well.
To lock the keypad manually, do the following:
1. Press .
2. Press Lock.
The icon indicates that the keypad is locked.
Note: It is possible to answer or reject incoming calls while the keypad is locked. If
configured in the WinPDM or CPDM3, it is also possible to make an emer-
gency call while the keypad is locked.
.
, and press Select.
S
ETTINGS
95