Using A Bluetooth Headset - Mitel DT690 User Manual

23.4
23.4.1
23.4.1.1
112
BLUETOOTH HEADSET
Note: Before you can connect a Bluetooth headset to your phone, Bluetooth function-
ality must be available in the phone. Bluetooth is factory-mounted on the circuit
board of the phone.
The Bluetooth technology replaces the cord between a cordless phone and the head-
set. This allows the user to move more freely and eliminates the risk of a headset cord
getting stuck.
Note: Bluetooth headsets are neither provided with nor sold together with the phone.
The following functions are available:
• Pairing the cordless phone with its headset.
• Choosing the device to use when making a call.
• Playing a ring signal through the Bluetooth headset.
• Answering and connecting sound to the Bluetooth headset when answering with
the headset button.
• Ending a call with the Bluetooth headset button.
• Transferring audio to and from the Bluetooth headset during a call, using the
menu in the cordless phone.
• Increasing and decreasing the volume in the Bluetooth headset with the volume
buttons on the cordless phone.
Note: The Bluetooth headset functions may vary. See your Bluetooth headset manual.
The cordless phone is tested with a number of Bluetooth headsets. Since the Blue-
tooth supports the Bluetooth 2.0 standard, other headsets may also work although this
has not been verified by Mitel.

Using a Bluetooth Headset

For optimal performance, place the Bluetooth headset and the phone on the same
side of your body. The best audio quality in the headset is achieved when there is no
obstructions, including your body, between the headset and the cordless phone.
Activating a Bluetooth Headset
Enabling, disabling, and connecting a Bluetooth headset is explained in 20.1 Blue-
tooth on page 116.
Up to four headset can be paired to the phone, but only one at a time can be active. To
pair another headset, repeat the steps in 21.1.3 Connecting a Bluetooth Headset on
page 100.
To activate a Bluetooth headset, do the following:
1. Press Menu, select
2. Select Bluetooth, and press Select.
3. Select Headset, and press Select.
4. Step with the navigation keys to the headset to be connected, Select.
When the headset has been connected, the following message is displayed:
Connection successful.
, and press Select.
1424-EN/LZT 103 088 Uen J1 2016-03-18