Refer Back; Blind Transfer - Mitel DT690 User Manual

12.6.2
12.7
12.8
1424-EN/LZT103 088 Uen J1 2016-03-18
Note: If End call does not appear when you press More, press R to return to the first
party.

Refer Back

When you have made an inquiry to another party, and want to switch between the
calls, do the following:
1. Press More, select Switch and press Select.
Note: If Switch does not appear when you press More, press 2 to refer back. Sweden,
press R.
TRANSFER
If you wish to transfer an ongoing call to another extension, you can use the transfer
feature.
Note: This feature needs to be configured in the WinPDM or CPDM3. Please contact
the system administrator.
To transfer an ongoing call to another extension, do the following:
1. Press More, select New call and press Select.
2. Dial the third party and press
You can dial the number, or use the phonebook or the call list to make the call.
3. Press More, select Transfer, and press Select.
The ongoing call is transferred.
Note: If Transfer does not appear when you press More, you can also do the following
to transfer a call: Press R, dial the third party, and press
the third party answers.

BLIND TRANSFER

With the blind transfer feature, you can transfer a call directly to a third party, without
having to wait for a ring tone when you dial the third party number. When the transfer
is complete, you will be disconnected.
Note: This feature needs to be configured in the WinPDM or CPDM3. Please contact
the system administrator.
To transfer an ongoing call to a number that cannot be retrieved, do the following:
1. Press More, select Transf. to new and press Select.
Note: If Transf. to new does not appear when you press More, you can also do the
following to transfer a call: Press R, dial the third party, and press
the third party answers.
2. Dial the third party, and press
.
.
D C
URING ALLS
before or after
before
61