Selecting A System; Subscribing To A New System - Mitel DT690 User Manual

21.2
21.2.1
21.2.1.1
21.2.2
1424-EN/LZT103 088 Uen J1 2016-03-18
See the user manual for the Bluetooth headset.
8. Press OK.
If the pairing mode was successful, the following message is displayed:
Pairing successful.
When a Bluetooth headset is connected,
SYSTEM
The cordless phone supports GAP/CAP standard. This makes it possible to log on to
any GAP compatible system with your phone. Only available systems are displayed.

Selecting a System

To select a system, do the following:
1. Press Menu, select
2. Select System, and press Select.
3. Select Change system and press Select.
4. Select Automatically (or a specific system from the list), and press Select.
If the phone is set to Automatically, a system will be selected according to the
priority list.
Setting System Priority
The default order of priority is the order of entered subscriptions. This means that the
first subscribed system has the highest priority. This list can be edited by the user. It is
possible to set the systems in priority by moving them up or down in the list. It is also
possible to get priority information by selecting Info.
1. Press Menu, select
2. Select System, and press Select.
3. Select Priority, and press Select.
4. Change the priority if needed by selecting Up or Down.
5. Press Back to save.

Subscribing To a New System

The cordless phone can subscribe to up to 8 different cordless systems. To subscribe
a new system, you will need the Portable Access Right Key (PARK) and Authentica-
tion code (AC) related to the system you are going to logon to. To retrieve this informa-
tion, contact the system administrator.
To subscribe to a new system, do the following:
1. Press Menu, select
2. Select Systems, and press Select.
3. Select Subscribe, and press Select.
is displayed in front of the headset.
, and press Select.
, and press Select.
, and press Select.
C
ONNECTION
101