Create A Meeting; Start A Meeting - RADVision SCOPIA Elite 5100 Series Quick Start Manual

C
REATE A
M
EETING
R
EQUIREMENTS
S M
TART A EETING
8 SCOPIA Elite 5100 Series MCU Quick Start
The following is a brief introduction for setting up your first
meeting. It includes examples of the dialing sequences used to
join a meeting or to invite others into the meeting.
The following information is necessary for dialing into and
monitoring a meeting:
A meeting ID number composed of a valid service prefix
number and unique meeting number.
The web address of the MCU hosting the meeting.
You can initiate a meeting by dialing to the MCU directly from an
H.323 or SIP terminal or through a gateway from an H.320
terminal, a 3G-H.324M terminal or a regular telephone.
Upon meeting initiation, the meeting manager can either invite
other participants into the meeting or supply each participant with
the meeting ID number for dialing directly into the meeting.
Dialing to the MCU using a meeting ID number
Procedure
1. Compose a meeting ID number using an appropriate
service prefix and a unique ID number up to 256
characters long.
2. Notify all meeting participants of the meeting ID
number. Users joining the meeting via gateways also
need to know a gateway phone number.
3. Dial the meeting ID number to start the
meeting, as follows:
<service prefix>+<unique ID number>.
As soon as the MCU accepts the call, the meeting is
established.