Event List - JUMO LOGOSCREEN Operating Manual

3 Operation and visualization

3.5 Event list

Events
Event
definition
Text
assignment
Standard texts
60
The tabular event list is concealed behind the menu item:
Different events can initiate texts in the recorder, which are included in the
event list. The list is saved to the RAM and the CompactFlash memory card.
Events may include:
- alarms triggered by out-of-limit conditions on individual channels,
- external texts triggered through logic inputs,
- message texts received via the serial interface,
- system messages (e.g. power ON/OFF, summer/winter time changeover),
- incrementing/decrementing of an (event) counter (usually triggered through
a logic input).
For all events, except for system messages, it is possible to configure
whether:
- the message text is to be included in the event list,
- the instrument-internal standard text
- or one of the texts (see below) is used.
The texts (standard texts which include 146 freely definable texts) are
assigned to events at the operating level "Configuration" (v Chapter 4
"Configuration parameters").
The recorder offers standard texts as listed in the following table:
Standard text
Grx Chany low alarm ON
Grx Chany low alarm OFF
Grx Chany high alarm ON
Grx Chany high alarm OFF
Logic input x ON
Logic input x OFF
Ext. input x ON
Ext. input x OFF
Power ON
Power OFF
Data lost
Summer time start
Summer time end
New configuration
Counter 1: +xxxxx
Counter 2: +xxxxx
Comment
x = group number
y = channel number
5 digits plus sign,
no decimal point