JUMO LOGOSCREEN Operating Manual page 42

3 Operation and visualization
Search result
"no value
found"
Value found
Continue
search
42
Window for defining the search criteria
Position of the value found
or
"no value found" display
The example above shows the search for the first occurrence of a
measurement >50 on channel 1 on the 14.04.03 within the period from
15:16:48 to 15:44:24.
Two results are possible:
- no (further) value was found
(display: "no value found")
- a value which fulfils the search criteria was found
If no (further) value was found, the text "no value found" is shown in the cursor
position field.
If a (further) value was found, the measurement representation is shifted in
such a way as to display the value that was found in the center of the
displayed range. The cursor (violet line) is positioned there.
If a (further) value was found which meets the search criteria, the softkey can
be used to search for further values until no further value is found.
Current zoom
Start search