JUMO LOGOSCREEN Operating Manual page 77

Configuration
Sensor
(internal analog
inputs and counters)
Linearization
(internal analog
inputs)
Connection circuit
(internal analog
inputs)
Cold junction
(internal analog
inputs)
External
cold jvunction
temperature
(internal analog
inputs)
Range start
(internal analog
inputs)
Range end
(internal analog
inputs)
Resistance
Ra, Rs, Re
(internal analog
inputs)
Resistance Ro, Rp
(internal analog
inputs)
Parameter
Configuration
Analog inputs
Analog input 1 — 12
Sensor
Configuration
Analog inputs
Analog input 1 — 12
Linearization
Configuration
Analog inputs
Analog input 1 — 12
Connection circuit
Configuration
Analog inputs
Analog input 1 — 12
Cold junction
Configuration
Analog inputs
Analog input 1 — 12
Ext. CJtemp.
Configuration
Analog inputs
Analog input 1 — 12
Range start
Configuration
Analog inputs
Analog input 1 — 12
Range end
Configuration
Analog inputs
Analog input 1 — 12
Resistance
Ra, Rs, Re
Configuration
Analog inputs
Analog input 1 — 12
Resistance
Ro, Rp
4 Configuration parameters
Analog inputs
Value/selection
Off,
Res. therm.,
Thermocouple, Current,
Voltage, Res. transm.,
Potentiom., Counter
Linear, Pt100, Pt100 JIS,
Ni100, Pt500, Pt1000,
Fe-Con J, NiCrCon E,
Ni-CrNi K, NiCrSi N,
Cu-Con T, PtRhPtRh B,
PtRh-Pt R, PtRh-Pt S,
Cu-Con U, Fe-Con L
Chromel-Copel, Cu50
2 wire,
3 wire,
4 wire
Intern.Pt100
Extern const
-50 to +50 to +100°C
any value
0mA
any value
20mA
0 — 4000Ω
0 — 4000Ω
Description
Depending on the sensor
that was selected, only the
relevant parameters can be
selected when configuring
the analog input.
v Chapter 2.5 "Counters"
Only for sensor:
resistance thermometer
and potentiometer
Only for sensor:
thermocouple
External cold junction
temperature for
thermocouples
Not for sensor:
resistance transmitter and
potentiometer
Not for sensor:
resistance transmitter and
potentiometer
Only for sensor:
resistance transmitter:
Only for sensor:
potentiometer:
77