Table Of Configuration Parameters - JUMO LOGOSCREEN Operating Manual

4 Configuration parameters

4.2 Table of configuration parameters

72
The table below lists all the instrument parameters. The order in which the
parameters are explained corresponds to the order in which they appear on
the instrument (in the menu structure).
The first column describes the path via the menus and windows to the
particular parameter.
The second column lists the possible settings for the parameters or the
possible selections. The factory default setting in this column is shown bold.
The third column contains a description of the parameter, or the possible
selections, if the parameter and its function or selection is not self-evident.
Note
"Instruments" are referred to as "devices" in the software and are referred to
as such in the following.