JUMO LOGOSCREEN Operating Manual page 90

4 Configuration parameters
Texts
20 (RS232/RS4xx)
Protocol
(20 (RS232/RS4xx))
Baud rate
(20 (RS232/RS4xx))
Data format
(20 (RS232/RS4xx))
Device address
(20 (RS232/RS4xx))
Min. response time
(20 (RS232/RS4xx))
21 (Profibus-DP)
Address
(21 (Profibus-DP))
Baud rate
(21 (Profibus-DP))
90
Configuration
The parameters Configuration
with increased security requirements, but not on this type of recorder.
Configuration
Parameter
Configuration
Texts
Configuration
Parameter
Configuration
Interfaces
20 (RS232/RS4xx)
Configuration
Interfaces
20 (RS232/RS4xx)
Protocol
Configuration
Interfaces
20 (RS232/RS4xx)
Baud rate
Configuration
Interfaces
20 (RS232/RS4xx)
Data format
Configuration
Interfaces
20 (RS232/RS4xx)
Device address
Configuration
Interfaces
20 (RS232/RS4xx)
Min. response
time
Configuration
Interfaces
21 (Profibus-DP)
Configuration
Interfaces
21 (Profibus-DP)
Address
Configuration
Interfaces
21 (Profibus-DP)
Baud rate
El. signature
El. signature are only active on recorders
Texts
Value/selection
Text 1 — 146
Interfaces
Value/selection
MODBUS,
JBUS
9600 baud,
19200 baud,
38400 baud
8-1-none,
8-1-odd,
8-1-even,
8-2-none
1 — 254
0 — 500msec
1 — 125 — 127
Description
v Chapter 3.8 "Text entry"
Description
Setting the parameters for
the serial interface
If possible, the fastest
transfer rate should be
selected here. The next
smaller rate should only be
selected if problems arise.
Setting the parameters for
the Profibus-DP interface.
Setting the address from
which the recorder can be
addressed in the Profibus-
DP network.
The baud rate is set
automatically by the
PROFIBUS-DP master.