JUMO LOGOSCREEN Operating Manual page 82

4 Configuration parameters
Differential
(hysteresis)
(analog channels,
group 1 — 6)
Text low alarm
(analog channels,
group 1 — 6)
Text high alarm
(analog channels,
group 1 — 6)
Alarm delay
(analog channels,
group 1 — 6)
82
Parameter
Configuration
Group config.
Group 1 — 6
Analog channels
Analog channel
1 — 6
Differential
(1) = Low limit
(2) = High limit
(3) = Differential
Configuration
Group config.
Group 1 — 6
Analog channels
Analog channel
1 — 6
Text
low alarm
Configuration
Group config.
Group 1 — 6
Analog channels
Analog channel
1 — 6
Text
high alarm
Configuration
Group config.
Group 1 — 6
Analog channels
Analog channel
1 — 6
alarm
delay
Value/selection
-99999 to 0 to +99999
(3)
(1)
Standard text,
Text 1 — 146,
No text
Standard text,
Text 1 — 146,
No text
0 — 32767s
Description
(3)
Alarm ON
Alarm OFF
(2)
v Chapter 3.5 "Event list"
v Configuration
Texts,
page 90
v Chapter 3.5 "Event list"
v Configuration
Texts,
page 90
Alarm delay is activated at
a value of <> 0.
When activated, an alarm
will only be generated
when it has been present
for at least as long as it
takes for the set time to
elapse.