Batch Reports - JUMO LOGOSCREEN Operating Manual

3.2.8 Batch reports

H
Batch reporting enables the creation of a flexible form to describe a batch
process within the recorder. It can only be run parallel to an external report and
is active when the parameter Configuration
Batches Status has been configured to "E.R.+batches".
Batch reporting (external report) can be controlled through one of the digital
signals. The selection is made using the parameter Configuration
Batches Ext.Report/Batches
For additional information on the digital signals, see
v Chapter 2.4 "Digital signals"
Two different screen representations are available for batch reporting:
- current batch report and
- completed batch report
The batch reporting function is described more fully on the
following pages.
The batch report shown only serves as an example.
It can be adapted to match your specific requirements through
reconfiguration.
3 Operation and visualization
Report/Batches
Control signal.
Ext.Report/
Report/
47