Editing - JUMO LOGOSCREEN Operating Manual

5.8.2 Editing

Undo ...
Restore ...
Parameteriza-
tion
Configuration
level
Settings via
Setup only
Setup data
info
Undoes the last editing action. In the menu, the setting that is being undone is
shown behind Undo.
The Restore function is only available if the Undo function has been called up.
This function is used to restore the setting that was deleted with Undo.
This function is activated by double-clicking (left mouse button) on the follow-
ing function in the dialog window.
This function is activated by double-clicking (left mouse button) on one of the
following functions in the dialog window.
This function is activated by double-clicking (left mouse button) on the follow-
ing function in the dialog window.
This function is activated by double-clicking (left mouse button) on one of the
following functions in the dialog window.
5 Setup software
111