JUMO LOGOSCREEN Operating Manual page 105

No log-in
Saving ID and
password
h First select the device version.
h Enter an additional description, if appropriate.
h Set one of the option fields, if appropriate.
h Press the
The default setting of the setup software is that a user who is logged in is
automatically logged in to a device that is found with the user's name and
password, and can thus communicate with the device.
Set the option ( ) if you do not want to log in. Please note that itis possible
that some functions, suchas Teleservice, will not be operable if you are not
logged in. The decisive factor is the current user list and the access rights that
are defined in the list.
If the option is active, the log-in is made to the device which has the user ID
and password that are entered, regardless of the actual user of the setup
software.
h Press the
h In the following dialog window, select the interface which you want to use
to access the device. Available options are:
button.
Save ID and password
Do not log in
button.
5 Setup software
105