JUMO LOGOSCREEN Operating Manual page 76

4 Configuration parameters
Time zone
(GMT dev.)
Language
Supply frequency
Temperature unit
Int.mem./
ser. read-out
(memory alarm)
Int.mem./read-out
via CF
(memory alarm)
CF card (external)
(memory alarm)
Factory setting
76
Parameter
Configuration
Device data
Time zone (GMT dev.)
Configuration
Device data
Language
Configuration
Device data
Supply frequency
Configuration
Device data
Temperature unit
Configuration
Device data
Memory alarm
Int.mem./
ser. read-out
Configuration
Device data
Memory alarm
Int.mem./
read-out via CF
Configuration
Device data
Memory alarm
CF card (external)
Configuration
Device data
Enter defaults
Value/selection
-720 to 60 to +720min
German,
English,
French
50, 60Hz
°C, °F
0 — 1 — 256MB
0 — 1 — 256MB
0 — 256MB
No,
Yes
Description
Enter here the deviation of
your time zone from GMT
(Greewich Mean Time).
For Germany, these are 60
min (= 1h). The summer
time must not be taken into
account.
Select the language for
displaying the device texts.
Limit for the available
memory with respect to
reading out data via the
interface.
v See "Digital signals" on
page 19.
Limit for the available
memory with respect to
reading out data via the
CompactFlash memory
card.
v See "Digital signals" on
page 19.
Limit for the available
memory of the external
CompactFlash memory
card.
v See "Digital signals" on
page 19.
Yes = accept factory
setting.
The parameter
automatically returns to
"No" after acceptance.