JUMO LOGOSCREEN Operating Manual page 113

Create
screenshot
Date and
time
Event counter
This function (also known as "print screen") is another option which is
available for documenting settings or events.
Start the function and operate the "Create" button. A screenshot (print-out) will
be created for the device that is connected. You can save the screenshot as a
bitmap, or print it out directly.
This function is used to match the date and time for a PC and a device.
Transmit date and time to device.
The new setting of the date and time of a device is made with the
or
under "New setting" as the basis for making the setting.
The function sets the date and time of a device.
The
more than 30 seconds, the function will not be performed.
(cyclically). Permanent read-out must be terminated through
device clock cannot be set during permanent read-out.
This function can be used to read out the two internal and the two external
counters of the paperless recorder and set them to a specific value.
After starting up the function, a connection is made to a device and the current
count is displayed. You can now alter the individual counts. If you click
, the new counts will be adopted by the device.
Synchronize device time
with PC time
button. Both functions use the entries
function only sets the time. If there is a deviation of
ensures that the device clock is read out permanently
5 Setup software
Closes the function
. The
113