JUMO LOGOSCREEN Operating Manual page 87

External texts
(logic inputs)
Key inhibit
Time
synchronization
Configuration
Periodic report
External report/
Batches
Parameter
Configuration
Control functions
External texts
Logic input
1 — 7/External
input 1 — 6
Configuration
Control functions
Key inhibit
Configuration
Device data
Date and time
Time
synchroniz.
Parameter
Configuration
Report/Batches
Periodic report
Configuration
Report/Batches
Ext. report/Batches
Status
4 Configuration parameters
Value/selection
Standard text,
Text 1 — 146,
No text
Off,
LogInp.1 — 7,
Alarm Gr.1 — 6,
Combination alarm,
Logged in,
Error,
Modbus flag
Ext. Inp. 1 — 6,
CF plugged in
Stolen CF
Int. mem. al./CF,
Int. mem. al./ser,
Mem. al./CF card
Off,
LogInp.1 — 7,
Alarm Gr.1 — 6,
Combination alarm,
Logged in,
Error,
Modbus flag
Ext. Inp. 1 — 6,
CF plugged in
Stolen CF
Int. mem. al./CF,
Int. mem. al./ser,
Mem. al./CF card
Report/Batches
Value/selection
Off,
On
Off,
Only Ext. rep.,
E.R.+batches
Description
v Chapter 3.5 "Event list"
v Configuration
Texts,
page 90
The keys are inhibited as
soon as the selected logic
input is closed.
Using this parameter or
this function, the system
clocks of several recorders
can be synchronized
simultaneously.
When a logic input has
been selected and is
operated (transition from
"Low" to "High"), then the
time can be synchronized.
The seconds are decisive
in the time change. They
are used for rounding the
time up or down. Example:
12:55:29 -> 12:55:00
12:55:30 -> 12:56:00
Description
If a report is Off, it cannot
be called up. It will be
skipped automatically
when switching reports.
Activates the external
report and the batch
report, if required.
v Chapter 3.2.8 "Batch
reports"
87