Menu Functions; File - JUMO LOGOSCREEN Operating Manual

5 Setup software

5.8 Menu functions

5.8.1 File

New
Open
Save
Save as
Close
Delete
A
Export as
RTF text
Print
Print preview
Printer
setup
Default settings
Exit
110
Opens a new setup in the working area. The values will be preset to the factory
default settings.
Opens an existing setup from a file, and present the contents in the working
area.
Save the setup that is shown in the working area to a file. It is only necessary
to enter the file name once. If the file is saved again, no query is made about
the file name.
Save the setup that is shown in the working area to a file. Unlike the Save
function, this always asks for a file name.
Removes a complete setup from the working area. If changes have not yet
been saved, this can still be done immediately after calling up the Close
function.
Deletes a file from a hard disk or another type of data storage medium.
Deleted files cannot be recovered !
The entire current configuration is saved as an RTF file. The RTF file can be
opened by most word processing programs.
When you have called up the function, the selection of what is to be printed
appears first. Printing starts when the selection has been concluded.
The printed result is displayed on the screen. You can let several pages be
displayed, and alter the size of the pages on the screen.
Here you can make alterations to the settings for your printer. When the
program is started, the standard printer for Windows will always be set as the
active printer.
Here you can make alterations to the default settings for the program. The
alterations will only take effect after a fresh start of the setup software.
This closes down the setup software.