Text Entry - JUMO LOGOSCREEN Operating Manual

3.8 Text entry

Entry options
Character
selection
Character entry
The configurable texts can be entered either through the setup program or on
the instrument itself. This section describes the entry on the instrument.
The screen below is shown when a text (e. g. Configuration
config. Group 1
level for editing using
You are automatically in the editing mode.
Current text
Select the required character (the required digit) using the
.
After the entire text has been entered, it can either be accepted or all
alterations canceled.
h Enter text with
E
or
h cancel text entry with
3 Operation and visualization
Group name) has been selected at the configuration
E
.
Select character
Accept character
!..ÿ - all available characters
buttons and confirm entry with
D
Restrict visible characters:
A..Z - capital letters only
a..z - small letters only
0..9 - digits only
Group
69