JUMO LOGOSCREEN Operating Manual page 121

Entering
special
characters
Example
H
(Special) characters that cannot be input directly from the keyboard of the PC
can be entered with the help of the A key and the numerical combinations
that are specified in the table.
The special character © has to be entered:
h Position the cursor with the mouse, or by using the cursor keys, on the
point where the character is to be inserted.
h Press the A key and hold it down
h Enter the number combination 0169 in the number block (on the right-hand
side of the keypad) (the leading zero must be entered as well)
h Release the A key
The character © is inserted at the cursor position.
The character set depends on the language of the operating sys-
tem used and may differ from the example.
5 Setup software
121