JUMO LOGOSCREEN Operating Manual page 78

4 Configuration parameters
Start temperature
(internal analog
inputs)
End temperature
(internal analog
inputs)
Scaling start
(internal analog
inputs and counters)
Scaling end
(internal analog
inputs and counters)
Filter constant
(internal analog
inputs)
Channel name
(internal analog
inputs and counters)
Channel
description
(internal analog
inputs and counters)
Unit
(internal analog
inputs and counters)
78
Parameter
Configuration
Analog inputs
Analog input 1 — 12
Start temperature
Configuration
Analog inputs
Analog input 1 — 12
End temperature
Configuration
Analog inputs
Analog input 1 — 12
Counter 1 — 2
Scaling start
Configuration
Analog inputs
Analog input 1 — 12
Counter 1 — 2
Scaling end
Configuration
Analog inputs
Analog input 1 — 12
Addit'l parameters
Filter constant
Configuration
Analog inputs
Analog input 1 — 12
Counter 1 — 2
Addit'l parameters
Channel
name
Configuration
Analog inputs
Analog input 1 — 12
Counter 1 — 2
Addit'l parameters
Channel
description
Configuration
Analog inputs
Analog input 1 — 12
Counter 1 — 2
Addit'l parameters
Unit
Value/selection
any value
any value
-99999 to 0 to +99999
-99999 to +100 to +99999
(with analog input)
or
-99999 to +10000 to
+99999 (with counters)
0.0 — 0.1 — 10.0s
7 characters
Inp. x
or
counterx
2 x 20 characters
Meas. inp. x
or
event counter x
5 characters
%
(only with analog input, no
pre-assignment for counter
input)
Description
Only for sensor: current,
voltage with linearization,
resistance thermometer,
thermocouple.
Only for signals that have
not yet been linearized.
Only for sensor: current,
voltage with linearization,
resistance thermometer,
thermocouple.
Only for signals that have
not yet been linearized.
Only for sensor: current,
voltage with straight-line
linearization, for sensor:
resistance transmitter and
potentiometer, and for
counter inputs.
Only for sensor: current,
voltage with straight-line
linearization, for sensor:
resistance transmitter and
potentiometer, and for
counter inputs
Short designation. It is
shown in all diagram
representations.
v Chapter 3.8 "Text entry"
Detailed description. It is
additionally shown in the
two numerical displays.
v Chapter 3.8 "Text entry"
v Chapter 3.8 "Text entry"