JUMO LOGOSCREEN Operating Manual page 116

5 Setup software
Fresh
log-in / alter
password
116
Expanded password administration
The rights of the user can be
Using the Fresh log-in / Alter password function, you can
- activate the user and password query at the program start and
- modify the current password.
This function is only relevant for the operation of the setup software, but not
for the user list of the recorder.
Activating the user and password query at the program start
When the setup software is first newly installed, there will initially be no user
name and password query at the program start. You are automatically logged
in as "Specialist" with a blank password.
Proceed as follows:
Start the "Fresh log-in / Alter password" function
The name of the user is shown in the
modified here. selection list when logging in.
Additional name
for display purposes
The standard rights (rights that exist
if nobody is logged in) can be
modified here.