Alarm And Event Lists - JUMO LOGOSCREEN Operating Instructions Manual

Alarm lists
A
Event lists
H
H
The alarm and event lists can be called up in two ways:
- a call from one of the visualizations, e.g. curve presentation
(Chapter 3.2 "Overview of header lines")
or
- a call from the memory presentation
(Chapter 4 "Memory presentation (History)").
Alarm lists contain only the alarms that are currently present.
The alarm list will not be updated as long as the window is open.
Remedy: close once, and open again. This will update the alarms.
Events list contain all the events that have occurred,
as well as all alarms.
A maximum of 150 entries can be fitted into the two lists. The lists
will be deleted if a reconfiguration takes place.
The following description assumes that three batches are being
used. The number of batches may vary, because it can be
configured by the user.

5 Alarm and event lists

43