Parameterization - JUMO LOGOSCREEN Operating Manual

4.2.1 Parameterization

Contrast
Speed indication
CF card (external)
(memory display)
Int. memory: for
(memory display)
Switch-off event
(display off)
Waiting time
(display off)
Parameter
Parameterization
Contrast
Parameterization
Speed indication
Parameterization
Memory display
CF card (external)
Parameterization
Memory display
Int. memory: for
Parameterization
Display off
Switch-off event
Parameterization
Display off
Waiting time
4 Configuration parameters
Value/selection
0 — 13 — 31
in mm/h, time/div
Always,
If plugged in,
Never
Ser. read-out
Read-out via CF
Waiting time,
Control signal
0 — 32767min
Description
Display brightness
Your can select here if and
how the available memory
of the external
CompactFlash memory
card is displayed in the
status line.
v See "Memory display"
on page 57.
The type of display switch-
off is selected here
Time after which the
display is switched off. Any
key stroke will re-activated
the display. The parameter
can only be entered if the
parameter Switch-off event
is set on "Waiting time".
0 = display not off
73