Do you have a question about the MXU 375 and is the answer not in the manual?
Questions and answers
Shawnie Maunder
May 31, 2025
Why does the E light come on instead of the H or L on the display, when the bike has been driven for a while on the MXU 400?
1 comments:
Mr. Anderson
May 31, 2025
The "E" light appears on the display instead of "H" or "L" after driving the KYMCO MXU 400 for a while likely due to a malfunction or issue with the gear shift position switch or its electrical connections. The gear shift position switch is responsible for detecting and displaying the current gear (High, Low). If the sensor, wiring, or connections are faulty, the display may show "E" (error) instead.
To diagnose the issue: 1. Check the gear shift position switch located on the right side of the engine over the V-belt housing. 2. Use a multimeter to test voltage at the switch connector. 3. Inspect the harness, connector, 30 amp fuse, and battery connections.
If these components are faulty, replace or repair as needed.
This answer is automatically generated
John Janssen
February 7, 2025
Oil type and capacity for a kymco 2011 mxu 375? Thank you very much
1 comments:
Mr. Anderson
May 14, 2025
The oil type for a 2011 Kymco MXU 375 is 10W40, and the oil capacity is 3 liters.
Need help?
Do you have a question about the MXU 375 and is the answer not in the manual?
Questions and answers
Why does the E light come on instead of the H or L on the display, when the bike has been driven for a while on the MXU 400?
The "E" light appears on the display instead of "H" or "L" after driving the KYMCO MXU 400 for a while likely due to a malfunction or issue with the gear shift position switch or its electrical connections. The gear shift position switch is responsible for detecting and displaying the current gear (High, Low). If the sensor, wiring, or connections are faulty, the display may show "E" (error) instead.
To diagnose the issue:
1. Check the gear shift position switch located on the right side of the engine over the V-belt housing.
2. Use a multimeter to test voltage at the switch connector.
3. Inspect the harness, connector, 30 amp fuse, and battery connections.
If these components are faulty, replace or repair as needed.
This answer is automatically generated
Oil type and capacity for a kymco 2011 mxu 375? Thank you very much
The oil type for a 2011 Kymco MXU 375 is 10W40, and the oil capacity is 3 liters.
This answer is automatically generated