Table of Contents
Advertisement
2. Installation
This chapter describes the function of the NP2724M switch components and
shows how to install it on the desktop or shelf. Basic knowledge of networking
is assumed. Read this chapter completely before continuing.
2.1.
Product Description Overview
NP2724M supports 802.1Q VLAN, QoS, 802.1d / 1w/ 1s Spanning Tree
Protocol, 802.1x, Port Security, Port Mirroring, IGMP Snooping, SNTP, Storm
Control, Rate Control, SNMP features.
2.2.
Switch Front and Rear Panel
2.2.1.
NP2724M
The front panel of the NP2724M 24 port 10/100 + 2 Gigabit VLAN Managed
switch has 24 10/100 Mbps copper ports at the left, 2 10/100/1000 Mbps
copper ports and 2 Gigabit SFP slots at the right. The product name is
indicated at the top on the left. Figure 2.2.1a shows a front panel of the switch.
The rear panel has a power connector, and figure 2.2.1b shows a rear panel
of the switch. Table 2.2.1c shows the port function of the switch.
(FIG 2.2.1a NEED TO REPLACED BY THE FRONT PANEL IMAGE OF
NP2724M)
Port
1~24
NP2724M User Manual
Figure 2.2.1a Front Panel
Figure 2.2.1b Rear Panel
Table 2.2.1c Port Function
This is where you connect the Cat.3, 5, 5e or better
Ethernet cable for 10/100 Mbps Ethernet
Power
Function
3
Advertisement
Table of Contents
