System Setting - NetComm NP2500 User Manual

24-port 10/100 poe + 2-port 10/100/1000 websmart switch

Hide thumbs Also See for NP2500:

Table of Contents

System Setting

The System Setting includes the System name, Location name, Login Timeout, IP Address, Subnet Mask

and Gateway. Through the Web Management Utility, you can easily recognize the device by using the System

Name and the Location Name.

The Login Timeout is to set the idle time-out for security issue, when there is no action when running the

Web Smart Utility and the time is up, you must re-login to Web Smart Utility before you set the Utility.

Fill up the IP address, Subnet mask and Gateway for the device or enable DHCP get IP address from DHCP

server.

Figure 31.

NP2500 24-Port 10/100 PoE + 2-Port 10/100/1000 WebSMART Switch User Guide

YML842 Rev1

Table of Contents