Log Set Installation - kozy heat Alpha ALP-36-L Installation And Operation Manual

#AL36-500 LOG SET INSTALLATION
Numbers are located on the bottom of each log. Install in numerical order.
NOTE
Refer to following instructions and illustrations for proper placement.
Do not place logs directly over burner port holes.
CAUTION
Improper log placement may affect flame appearance and cause excessive soot to build up on logs and glass.
2
Figure 29a
Align holes in bottom of #1-#3 logs with mounting pins on burner, setting down into position. Place #4 log as shown.
7
9
Figure 29b
Position remaining logs in numerical order, aligning pins / holes in upper level logs with pins / holes in base logs
Randomly place klinkers around front of log rack. Use a stiff bristle brush to distribute rockwool embers onto burner and logs.
5
Cutout on back side of log #10 aligns with center tine on log rack.
1
4
6
10
29
3
8
11