Specifications; Fireplace Dimensions; Clearances - kozy heat Alpha ALP-36-L Installation And Operation Manual

FIREPLACE DESCRIPTION
DIMENSIONS
INCHES
MILLIMETERS
All stand-off brackets must be attached to fireplace. Do not remove. Top stand-off brackets are not load bearing.
Non-combustible zone: Top stand-offs provide 5-5/16" (135mm) minimum clearance to header. Use only non-combustible
WARNING
material in this area for entire width of fireplace. Do not use wood, sheetrock etc. in this zone. Other clearances apply.
All clearances must be maintained.
LEFT SIDE
Figure 6a

CLEARANCES

Top of unit face to framing
From unit left & right side stand-offs
From unit back stand-offs
From bottom stand-offs
Top of unit face to ceiling
Side of finishing edge to adjacent sidewall
Unit front to combustibles
Mantel 9" (229mm) deep from floor fireplace is sitting on

SPECIFICATIONS

FIREPLACE DIMENSIONS

Height Width Back Width
41-11/16 46-1/2 41-11/16
1059 1182 1059
Depth Opening
Width
23-3/8 38
593 965
TOP
FRONT
5-5/16" (135mm)
0"
0"
0"
30-5/16" (770mm)
6" (152mm)
36" (914mm)
47" (1194mm)
6
Glass Frame Top Stand-off Back to vent
Height Height center
32 5-5/16 9-3/8
813 135 238
RIGHT SIDE