Light Kit - kozy heat Alpha ALP-36-L Installation And Operation Manual

CAUTION Disconnect all electric power from fireplace before performing this task.
NOTE To avoid damage and prolong the life of halogen bulbs, never touch with bare hands. Always use a soft cloth when handling.
1. Remove glass frame assembly. Page 16.
2. Remove light kit access panel at inside top of firebox - secured
with (2) screws.
3. Using a 1/4 wrench, loosen but do not remove bulb clips located
inside light chamber.
4. Install (2) halogen bulbs (included in components packet) into
lamp bases. Reposition bulb clips over tips of halogen bulbs.
Retighten screws, being careful not to over-tighten causing bulbs
to shatter.
5. Reinstall access cover, securing with screws previously removed.

LIGHT KIT

Figure 27a
27
Bulb clips